Counselling Code : V I T B
For Admissions Contact : +91 99494 86543
Publications List
Upto 2017
Title: Mechanical Anisotropy and Microstructural Changes during Cryorolling of Al-Mg-Si alloy
N. Naga Krishna
Source: Materials Characterization Volume: 107,P: 302-308(GS)
Title: Synthesis of alumin a nano powder Using mixed fuel by solution combustion approach
Ch.NS Krishna, Mangam Venu
Source: International Journal of Research in Engineering and Technology Volume: 5,P: 162-164(GS)
Title: Experimental Evaluation of Lubricant Effect on Cold Forward Extrusion of AA6063.
Prasad K.E.V. and Anupama Francy K
Source: International Conference on Mechanical & Production Engineering (ICMPE) Volume: 5,P: 162-164(GS)
Title: Copper Nanocomposites: Synthesis, Characterization and Properties
Mangam Venu
Source: Siddhartha Das Publisher: LAMBERT Academic Publishing Volume: 978,3P: 96233-96235(GS)
Title: Parametric Instability Of Rotating Cantilever Functionally Graded MaterialPlates
Ramu Inala
Source: InternationalJournalOfScientificResearch Volume: 6,7P: 488-494(GS)
N. Naga Krishna
Source: Materials Characterization Volume: 107,P: 302-308(GS)
Title: Synthesis of alumin a nano powder Using mixed fuel by solution combustion approach
Ch.NS Krishna, Mangam Venu
Source: International Journal of Research in Engineering and Technology Volume: 5,P: 162-164(GS)
Title: Experimental Evaluation of Lubricant Effect on Cold Forward Extrusion of AA6063.
Prasad K.E.V. and Anupama Francy K
Source: International Conference on Mechanical & Production Engineering (ICMPE) Volume: 5,P: 162-164(GS)
Title: Copper Nanocomposites: Synthesis, Characterization and Properties
Mangam Venu
Source: Siddhartha Das Publisher: LAMBERT Academic Publishing Volume: 978,3P: 96233-96235(GS)
Title: Parametric Instability Of Rotating Cantilever Functionally Graded MaterialPlates
Ramu Inala
Source: InternationalJournalOfScientificResearch Volume: 6,7P: 488-494(GS)
2018-'19
1) Title: Multiple Process
Parameter Optimization of Roll Forming on High Strength Steelusing TOPSIS
Gopala krishnaiah, Srinivasarao. Ch, Anupama francy. K
Source: International Journal of Engineering & Technology Volume: 7,P: 199-202(GS)
2) Title: Taguchi based grey relation alanalysis for optimization of machining parameters of CNC turning steel 316
Ramu I, P Srinivas and K Vekatesh
Source: Materials Science & Engineering Volume: ,P: 377-383(GS)
3) Title: Experimental Investigation on Performance Characteristics of FourStroke single Cylinder Petrol Engine Using a Pre-Heating Set-Up and Fuel Blends
K. Rajendra
Source: International Conference on Advances in Design, Materials, Manufacturing & Energy System[ADMMES-2018] Volume: ,P: -(GS)
4) Title: Natural frequency of skew FGM plates using finite element method
Ramu I., Seshu K.V.G.R., Venu M.
Source: IOP Conference Series: Materials Science and Engineering Volume: 455,1P: -(Scopus)
5) Title: Stir Casting Process Simulation by Computational Fluid Dynamics for uniform Nano particles distribution in Al Semi Solid Metal
Rajendra K., Sekhar Babu M.V., Srinivas P.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
6) Title: Stir Casting Process Simulation by Computational Fluid Dynamics for uniform Nano particles distribution in Al Semi Solid Metal
Rajendra K., Sekhar Babu M.V., Srinivas P.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
7) Title: Stir Casting Process Simulation by Computational Fluid Dynamics for uniform Nano particles distribution in Al Semi Solid Metal
Rajendra K., Sekhar Babu M.V., Srinivas P.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
8) Title: Study on Influence of Heat Treatment on Mechanical Properties and Machinability during CNC Turning of AA6061 Alloy
Naga Krishna N., Praveen M., Mangam V.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
9) Title: Study on Influence of Heat Treatment on Mechanical Properties and Machinability during CNC Turning of AA6061 Alloy
Naga Krishna N., Praveen M., Mangam V.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
10) Title: Study on Influence of Heat Treatment on Mechanical Properties and Machinability during CNC Turning of AA6061 Alloy
Naga Krishna N., Praveen M., Mangam V.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
11) Title: Taguchi based grey relational analysis for optimization of machining parameters of CNC turning steel 316
Ramu I., Srinivas P., Vekatesh K.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
12) Title: Taguchi based grey relational analysis for optimization of machining parameters of CNC turning steel 316
Ramu I., Srinivas P., Vekatesh K.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
13) Title: Taguchi based grey relational analysis for optimization of machining parameters of CNC turning steel 316
Ramu I., Srinivas P., Vekatesh K.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
14) Title: Effect of hygrothermal environment on free vibration characteristics of FGM plates by finite element approach
Ramu I., Narendra M., Venu M.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
15) Title: Effect of hygrothermal environment on free vibration characteristics of FGM plates by finite element approach
Ramu I., Narendra M., Venu M.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
16) Title: Effect of hygrothermal environment on free vibration characteristics of FGM plates by finite element approach
Ramu I., Narendra M., Venu M.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
17) Title: Study on CFF-Polyester Composites
Choudary R.B., Krishna N.N., Bhargava N.R.M.R.
Source: Materials Today: Proceedings Volume: 5,2P: 8514-8522(Scopus)
18) Title: Study on CFF-Polyester Composites
Choudary R.B., Krishna N.N., Bhargava N.R.M.R.
Source: Materials Today: Proceedings Volume: 5,2P: 8514-8522(Scopus)
19) Title: Study on CFF-Polyester Composites
Choudary R.B., Krishna N.N., Bhargava N.R.M.R.
Source: Materials Today: Proceedings Volume: 5,2P: 8514-8522(Scopus)
Gopala krishnaiah, Srinivasarao. Ch, Anupama francy. K
Source: International Journal of Engineering & Technology Volume: 7,P: 199-202(GS)
2) Title: Taguchi based grey relation alanalysis for optimization of machining parameters of CNC turning steel 316
Ramu I, P Srinivas and K Vekatesh
Source: Materials Science & Engineering Volume: ,P: 377-383(GS)
3) Title: Experimental Investigation on Performance Characteristics of FourStroke single Cylinder Petrol Engine Using a Pre-Heating Set-Up and Fuel Blends
K. Rajendra
Source: International Conference on Advances in Design, Materials, Manufacturing & Energy System[ADMMES-2018] Volume: ,P: -(GS)
4) Title: Natural frequency of skew FGM plates using finite element method
Ramu I., Seshu K.V.G.R., Venu M.
Source: IOP Conference Series: Materials Science and Engineering Volume: 455,1P: -(Scopus)
5) Title: Stir Casting Process Simulation by Computational Fluid Dynamics for uniform Nano particles distribution in Al Semi Solid Metal
Rajendra K., Sekhar Babu M.V., Srinivas P.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
6) Title: Stir Casting Process Simulation by Computational Fluid Dynamics for uniform Nano particles distribution in Al Semi Solid Metal
Rajendra K., Sekhar Babu M.V., Srinivas P.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
7) Title: Stir Casting Process Simulation by Computational Fluid Dynamics for uniform Nano particles distribution in Al Semi Solid Metal
Rajendra K., Sekhar Babu M.V., Srinivas P.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
8) Title: Study on Influence of Heat Treatment on Mechanical Properties and Machinability during CNC Turning of AA6061 Alloy
Naga Krishna N., Praveen M., Mangam V.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
9) Title: Study on Influence of Heat Treatment on Mechanical Properties and Machinability during CNC Turning of AA6061 Alloy
Naga Krishna N., Praveen M., Mangam V.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
10) Title: Study on Influence of Heat Treatment on Mechanical Properties and Machinability during CNC Turning of AA6061 Alloy
Naga Krishna N., Praveen M., Mangam V.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
11) Title: Taguchi based grey relational analysis for optimization of machining parameters of CNC turning steel 316
Ramu I., Srinivas P., Vekatesh K.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
12) Title: Taguchi based grey relational analysis for optimization of machining parameters of CNC turning steel 316
Ramu I., Srinivas P., Vekatesh K.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
13) Title: Taguchi based grey relational analysis for optimization of machining parameters of CNC turning steel 316
Ramu I., Srinivas P., Vekatesh K.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
14) Title: Effect of hygrothermal environment on free vibration characteristics of FGM plates by finite element approach
Ramu I., Narendra M., Venu M.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
15) Title: Effect of hygrothermal environment on free vibration characteristics of FGM plates by finite element approach
Ramu I., Narendra M., Venu M.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
16) Title: Effect of hygrothermal environment on free vibration characteristics of FGM plates by finite element approach
Ramu I., Narendra M., Venu M.
Source: IOP Conference Series: Materials Science and Engineering Volume: 377,1P: -(Scopus)
17) Title: Study on CFF-Polyester Composites
Choudary R.B., Krishna N.N., Bhargava N.R.M.R.
Source: Materials Today: Proceedings Volume: 5,2P: 8514-8522(Scopus)
18) Title: Study on CFF-Polyester Composites
Choudary R.B., Krishna N.N., Bhargava N.R.M.R.
Source: Materials Today: Proceedings Volume: 5,2P: 8514-8522(Scopus)
19) Title: Study on CFF-Polyester Composites
Choudary R.B., Krishna N.N., Bhargava N.R.M.R.
Source: Materials Today: Proceedings Volume: 5,2P: 8514-8522(Scopus)
2019-'20
1) Title: Implementation of lean six sigma in public road transportation
Yerubandi V.S.M., Mathi P., Namburi K.P.V.
Source: International Journal of Innovative Technology and Exploring Engineering Volume: 9,1P: 4937-4940(Scopus)
2) Title: Design And Cfd Analysis Of A3D Convergent Divergent Nozzle Using Ansys Fluent
Anantha Gopal, C. Naga Bhaskar, Ch.Naveen Kumar
Source: International Journal of Research Volume: 3,6P: -(GS)
3) Title: Accreditation of self-financing technical institutions in india: A new perspective to improve quality
Durga Prasad G.S., Ray G.D., Mangam V.
Source: Journal of Engineering Education Transformations Volume: 33,2P: 48-55(Scopus)
4) Title: P Gopala krishnaiah Optimization of direct extrusion process parameter on 16MnCr5 and AISI1010 using DEFORM- 3D
K Anupama Francy, Ch Srinivasa Rao
Source: Procediain Manufacturing Volume: ,P: -(GS)
5) Title: Process Parameter Optimization of Cold Forward Direct Extrusion of Al6063 alloy using DEFORM3D
K Anupama Francy, Ch Srinivasa Rao, P Gopala krishnaiah
Source: proceedings of ETME-2019 Volume: ,P: 9-10(GS)
6) Title: Vibration Response of Sandwich Beam with Viscoelastic Core and FGM Face Sheets Using Finite Element Method Emerging Trends in Mechanical Engineering
Ramu,M.RaghuramanK.V.G.R.Seshu
Source: Lecture Notes in Mechanical Engineering. Springer Volume: ,P: 377-386(GS)
7) Title: Image Correlation Technique for Slope and Curvature of a Cantilever Beam Using Light Intensity,Emerging Trends in Mechanical Engineering
M.Raghuraman,I.Ramu
Source: Lecture Notes in Mechanical Engineering. Springer Volume: ,P: 539-547(GS)
8) Title: Integration of Grid Tie Solar Energy Using Bidirectional Meter for Electrical Power and to the Utility Power Grid
Bhanuprakash Chebrolu, Manjunath Taredahalli Shanmukappa
Source: IJIEMR Transactions Volume: 8,12P: 172-178(GS)
Yerubandi V.S.M., Mathi P., Namburi K.P.V.
Source: International Journal of Innovative Technology and Exploring Engineering Volume: 9,1P: 4937-4940(Scopus)
2) Title: Design And Cfd Analysis Of A3D Convergent Divergent Nozzle Using Ansys Fluent
Anantha Gopal, C. Naga Bhaskar, Ch.Naveen Kumar
Source: International Journal of Research Volume: 3,6P: -(GS)
3) Title: Accreditation of self-financing technical institutions in india: A new perspective to improve quality
Durga Prasad G.S., Ray G.D., Mangam V.
Source: Journal of Engineering Education Transformations Volume: 33,2P: 48-55(Scopus)
4) Title: P Gopala krishnaiah Optimization of direct extrusion process parameter on 16MnCr5 and AISI1010 using DEFORM- 3D
K Anupama Francy, Ch Srinivasa Rao
Source: Procediain Manufacturing Volume: ,P: -(GS)
5) Title: Process Parameter Optimization of Cold Forward Direct Extrusion of Al6063 alloy using DEFORM3D
K Anupama Francy, Ch Srinivasa Rao, P Gopala krishnaiah
Source: proceedings of ETME-2019 Volume: ,P: 9-10(GS)
6) Title: Vibration Response of Sandwich Beam with Viscoelastic Core and FGM Face Sheets Using Finite Element Method Emerging Trends in Mechanical Engineering
Ramu,M.RaghuramanK.V.G.R.Seshu
Source: Lecture Notes in Mechanical Engineering. Springer Volume: ,P: 377-386(GS)
7) Title: Image Correlation Technique for Slope and Curvature of a Cantilever Beam Using Light Intensity,Emerging Trends in Mechanical Engineering
M.Raghuraman,I.Ramu
Source: Lecture Notes in Mechanical Engineering. Springer Volume: ,P: 539-547(GS)
8) Title: Integration of Grid Tie Solar Energy Using Bidirectional Meter for Electrical Power and to the Utility Power Grid
Bhanuprakash Chebrolu, Manjunath Taredahalli Shanmukappa
Source: IJIEMR Transactions Volume: 8,12P: 172-178(GS)
2020-'21
1) Title: Influence of hygrothermal environment and FG material on natural frequency and parametric instability of plates
Inala R.
Source: Mechanics of Advanced Composite Structures Volume: 7,1P: 89-101(Scopus)
2) Title: Image Correlation Technique for Slope and Curvature of a Cantilever Beam Using Light Intensity
Raghuraman M., Ramu I.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 539-547(Scopus)
3) Title: Vibration Response of Sandwich Beam with Viscoelastic Core and FGM Face Sheets Using Finite Element Method
Ramu I., Raghuraman M., Seshu K.V.G.R.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 377-386(Scopus)
4) Title: Modeling and simulation of Aluminum 1100 alloy in an extrusion process
Namburi K.P.V., Kothasiri A.F., Yerubandi V.S.M.
Source: Materials Today: Proceedings Volume: 23,P: 518-522(Scopus)
5) Title: Experimental Investigation of Paddy Grain Drying Mechanism
Vinod M., Raghuraman M., Chakravarthi V.M.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 135-143(Scopus)
6) Title: Influence of FGM on the Parametric Instability of Skew Plates in Thermal Environment
Ramu I., Raghuraman M., Venu M.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 529-539(Scopus)
7) Title: Optimization of EDM Process Parameters on Aluminum Alloy 6082 by Using Multi-objective Genetic Algorithm
Md Riyaz S., Srinivas P., Ramu I.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 499-508(Scopus)
8) Title: Experimental Investigation for Finding Defects on Epoxy-Coated Cantilever Beam Using Optical Method
Raghuraman M., Ramu I.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 331-338(Scopus)
Inala R.
Source: Mechanics of Advanced Composite Structures Volume: 7,1P: 89-101(Scopus)
2) Title: Image Correlation Technique for Slope and Curvature of a Cantilever Beam Using Light Intensity
Raghuraman M., Ramu I.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 539-547(Scopus)
3) Title: Vibration Response of Sandwich Beam with Viscoelastic Core and FGM Face Sheets Using Finite Element Method
Ramu I., Raghuraman M., Seshu K.V.G.R.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 377-386(Scopus)
4) Title: Modeling and simulation of Aluminum 1100 alloy in an extrusion process
Namburi K.P.V., Kothasiri A.F., Yerubandi V.S.M.
Source: Materials Today: Proceedings Volume: 23,P: 518-522(Scopus)
5) Title: Experimental Investigation of Paddy Grain Drying Mechanism
Vinod M., Raghuraman M., Chakravarthi V.M.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 135-143(Scopus)
6) Title: Influence of FGM on the Parametric Instability of Skew Plates in Thermal Environment
Ramu I., Raghuraman M., Venu M.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 529-539(Scopus)
7) Title: Optimization of EDM Process Parameters on Aluminum Alloy 6082 by Using Multi-objective Genetic Algorithm
Md Riyaz S., Srinivas P., Ramu I.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 499-508(Scopus)
8) Title: Experimental Investigation for Finding Defects on Epoxy-Coated Cantilever Beam Using Optical Method
Raghuraman M., Ramu I.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 331-338(Scopus)
2021-'22
1) Title: Effect of heater and condenser orientations on fluid flow behaviour in a two-phase natural circulation loop
Sudheer S.V.S., Kumar K.K., Balasubramanian K.
Source: Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering Volume: 235,5P: 1718-1725(Scopus) (WoS)
2) Title: Design and evolution of a prosthetic socket for lower limb amputation to patient
Ratnakar G.G., Ramu I.
Source: Trends in Biomaterials and Artificial Organs Volume: 35,3P: 277-282(Scopus)
3) Title: Multiple process parameter optimization of forward extrusion process on aa 2024
Kothasiri A.F., Chalamalasetti S.R., Peteti G.
Source: International Journal of Modern Manufacturing Technologies Volume: 13,2P: 63-75(Scopus)
4) Title: Design and Development of Patient- Specific Prosthetic Socket for Lower Limb Amputation
Gubbala, Giri Ratnakar, and Ramu Inala
Source: Material Science Volume: 1,2P: 32-42(GS)
5) Title: Experimental Investigation of Automatic Aeration Process and Condition of Aqua Ponds Monitoring System with the Help of Internet of Things
Vinod M., Raghuraman M., Chakravarthi V.M.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 381-390(Scopus)
6) Title: Influence of Vegetable Oil Based Lubricants with Nano Particles on Surface Roughness of AISI 1020 and AA 2024 Alloy
Ramya T., Venu M., Sunil Kumar K.T., Anupama Francy K.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 163-173(Scopus)
7) Title: Effect of Porosity and Thermal Medium on the Vibration Characteristics of Two-Dimensional FGM Plates
Ramu I., Raghuraman M., Venu M.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 413-423(Scopus)
8) Title: Comparison of Mechanical Performance of the Various Stent Materials: A Finite Element Analysis (FEA) Approach
Raghuraman M., Ramu I., Chaithanya Vinay V.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 449-455(Scopus)
Sudheer S.V.S., Kumar K.K., Balasubramanian K.
Source: Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering Volume: 235,5P: 1718-1725(Scopus) (WoS)
2) Title: Design and evolution of a prosthetic socket for lower limb amputation to patient
Ratnakar G.G., Ramu I.
Source: Trends in Biomaterials and Artificial Organs Volume: 35,3P: 277-282(Scopus)
3) Title: Multiple process parameter optimization of forward extrusion process on aa 2024
Kothasiri A.F., Chalamalasetti S.R., Peteti G.
Source: International Journal of Modern Manufacturing Technologies Volume: 13,2P: 63-75(Scopus)
4) Title: Design and Development of Patient- Specific Prosthetic Socket for Lower Limb Amputation
Gubbala, Giri Ratnakar, and Ramu Inala
Source: Material Science Volume: 1,2P: 32-42(GS)
5) Title: Experimental Investigation of Automatic Aeration Process and Condition of Aqua Ponds Monitoring System with the Help of Internet of Things
Vinod M., Raghuraman M., Chakravarthi V.M.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 381-390(Scopus)
6) Title: Influence of Vegetable Oil Based Lubricants with Nano Particles on Surface Roughness of AISI 1020 and AA 2024 Alloy
Ramya T., Venu M., Sunil Kumar K.T., Anupama Francy K.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 163-173(Scopus)
7) Title: Effect of Porosity and Thermal Medium on the Vibration Characteristics of Two-Dimensional FGM Plates
Ramu I., Raghuraman M., Venu M.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 413-423(Scopus)
8) Title: Comparison of Mechanical Performance of the Various Stent Materials: A Finite Element Analysis (FEA) Approach
Raghuraman M., Ramu I., Chaithanya Vinay V.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 449-455(Scopus)
2022-'23
1) Title: Computational Fluid Dynamics Study of a Compound Flow Field for Proton Exchange Membrane Fuel Cell (PEMFC) Performance Enhancement
Velisala V., Pullagura G., Chinnam N.K., Ganta R.
Source: Journal of Thermal Science Volume: 31,6P: 2374-2384(Scopus) (WoS)
2) Title: Study on mechanical and tribological characteristics of layered functionally graded polymer composite materials
Boggarapu V., Ruthik L., Gara D.K., Ojha S., Jain S., Gujjala R., Bandaru A.K., Inala R.
Source: Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering Volume: 236,5P: 1857-1868(Scopus) (WoS)
3) Title: Influence of coefficient of friction between punch-blank interface on formability of friction stir welded aluminum tailor welded blanks †An experimental and finite element simulation investigations
Battina N.M., Chirala H.K., Inala R., Kummitha O.R., Veeravalli L.N., Pericherla S.R.
Source: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science Volume: 236,17P: 9677-9686(Scopus) (WoS)
4) Title: Experimental prediction of flow boiling heat transfer coefficienWater and Copper Oxide nanofluid using ANNOVA techniqu
Dattatraya Hegde N., Kiran Kumar K., Venkata Sai Sudheer S.
Source: International Journal of Nano Dimension Volume: 13,3P: 296-310(Scopus) (WoS)
5) Title: Solar organic Rankine cycle - Parametric analysis based on exergy vs energy approaches
Samuel N., Srinath A., Sharma N., Tammana A.K., Shameer Basha M.
Source: Journal of Renewable and Sustainable Energy Volume: 14,4P: 1-10(Scopus) (WoS)
6) Title: Study on Microstructure and Anti-Corrosion Property of Stainless Steel Particles Deposition on Tiâ€6Alâ€4 V Substrate using Laser Cladding Technique
Jeyaprakash N., Kantipudi M.B., Yang C.-H.
Source: Lasers in Manufacturing and Materials Processing Volume: 9,2P: 214-227(Scopus)
7) Title: High torque density magnetorheological brake with multipole dual disc construction
Shiao Y., Kantipudi M.B.
Source: Smart Materials and Structures Volume: 31,4P: 1-13(Scopus) (WoS)
8) Title: Investigation of Cold Extrusion of Aluminum AA 2024 Alloy using Finite Element Analysis
Kothasiri A.F., Chalamalasetti S.R.
Source: INCAS Bulletin Volume: 14,3P: 157-171(Scopus)
9) Title: Importance of Hardening Effect and Its Analysis on Diametrical Fractured Ends of Tensile Testing of Al and Steel
Ponnusamy M., Pungaiah S.S., Prabhu M.S., Ramji B.R., Srinivas Y., Periyasamy S.
Source: Advances in Materials Science and Engineering Volume: 2022,P: 1-10(Scopus)
10) Title: Evolution of microstructure and mechanical properties of LM25â€HEA composite processed through stir casting with a bottom pouring system
Chinababu M., Krishna N.N., Sivaprasad K., Prashanth K.G., Rao E.B.
Source: Materials Volume: 15,1P: 1-14(Scopus) (WoS)
11) Title: Investigation on the role of microstructure and temperature on tribological characteristics of fine-grained ZE41 Mg alloy
Venkataiah M., Anup Kumar T., Venkata Rao K., Anand Kumar S., Dumpala R., Ratna Sunil B.
Source: Tribology - Materials, Surfaces and Interfaces Volume: 16,1P: 68-75(Scopus)
12) Title: Temperature-dependent 2-dimensional porous FG plates free vibration analysis using finite element approach
Ramu I
Source: Incas Bulletin Volume: 14,4P: 119-129(GS)
13) Title: Suitability of Hybrid Aluminium Metal Matrix Composite Material to Replace Cast Iron in Automobile Components
Habibullah M., Manikanta N.V.V., Varun A., Praveen M.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 339-349(Scopus)
14) Title: Computational Analysis of a Convergent Divergent Nozzle
Pothala S., Raju M.V.J., Bangarraju B., Lakshmi Narayana V.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 503-509(Scopus)
15) Title: Heat Transfer Characteristics of Spherical Finned Rectangular Microchannel
Sudheer S.V.S., Kumar C.H.N., Mahesh G., Prakesh C.H.B.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 473-481(Scopus)
16) Title: Design and Evaluation of Manual Weeder for Dryland Crops
Krishna P.D.V.N., Chakravarthi V.M., Vinod M., Pothala S.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 491-501(Scopus)
17) Title: Investigation of Diesel Engine’s Performance Using Nano Additives in Biodiesel Blends (B20, B30 and B40)
Bangarraju B., Srinivas P., Narasinga Rao G., Bhanuprakash C.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 441-451(Scopus)
18) Title: Design and Fabrication of Automatic Vehicle for Railway Track Monitoring by Using ESP8266 Module
Daloji L., Ramu I., Rao N., Manikanta P.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 483-490(Scopus)
19) Title: Optimization of Dynamic Capacity of Deep Groove Ball Bearing by Using Genetic Algorithm
Bhanuteja K., Vinod M., Krishna D.V.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 329-338(Scopus)
20) Title: Influence of Drop Weight Low-Velocity Impact on Thin Panels Study by Numerical Simulation and Experimental Approach
Ramu I., Seshu K.V.G.R., Srinivas P., SenthilKumar P.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 281-288(Scopus)
Velisala V., Pullagura G., Chinnam N.K., Ganta R.
Source: Journal of Thermal Science Volume: 31,6P: 2374-2384(Scopus) (WoS)
2) Title: Study on mechanical and tribological characteristics of layered functionally graded polymer composite materials
Boggarapu V., Ruthik L., Gara D.K., Ojha S., Jain S., Gujjala R., Bandaru A.K., Inala R.
Source: Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering Volume: 236,5P: 1857-1868(Scopus) (WoS)
3) Title: Influence of coefficient of friction between punch-blank interface on formability of friction stir welded aluminum tailor welded blanks †An experimental and finite element simulation investigations
Battina N.M., Chirala H.K., Inala R., Kummitha O.R., Veeravalli L.N., Pericherla S.R.
Source: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science Volume: 236,17P: 9677-9686(Scopus) (WoS)
4) Title: Experimental prediction of flow boiling heat transfer coefficienWater and Copper Oxide nanofluid using ANNOVA techniqu
Dattatraya Hegde N., Kiran Kumar K., Venkata Sai Sudheer S.
Source: International Journal of Nano Dimension Volume: 13,3P: 296-310(Scopus) (WoS)
5) Title: Solar organic Rankine cycle - Parametric analysis based on exergy vs energy approaches
Samuel N., Srinath A., Sharma N., Tammana A.K., Shameer Basha M.
Source: Journal of Renewable and Sustainable Energy Volume: 14,4P: 1-10(Scopus) (WoS)
6) Title: Study on Microstructure and Anti-Corrosion Property of Stainless Steel Particles Deposition on Tiâ€6Alâ€4 V Substrate using Laser Cladding Technique
Jeyaprakash N., Kantipudi M.B., Yang C.-H.
Source: Lasers in Manufacturing and Materials Processing Volume: 9,2P: 214-227(Scopus)
7) Title: High torque density magnetorheological brake with multipole dual disc construction
Shiao Y., Kantipudi M.B.
Source: Smart Materials and Structures Volume: 31,4P: 1-13(Scopus) (WoS)
8) Title: Investigation of Cold Extrusion of Aluminum AA 2024 Alloy using Finite Element Analysis
Kothasiri A.F., Chalamalasetti S.R.
Source: INCAS Bulletin Volume: 14,3P: 157-171(Scopus)
9) Title: Importance of Hardening Effect and Its Analysis on Diametrical Fractured Ends of Tensile Testing of Al and Steel
Ponnusamy M., Pungaiah S.S., Prabhu M.S., Ramji B.R., Srinivas Y., Periyasamy S.
Source: Advances in Materials Science and Engineering Volume: 2022,P: 1-10(Scopus)
10) Title: Evolution of microstructure and mechanical properties of LM25â€HEA composite processed through stir casting with a bottom pouring system
Chinababu M., Krishna N.N., Sivaprasad K., Prashanth K.G., Rao E.B.
Source: Materials Volume: 15,1P: 1-14(Scopus) (WoS)
11) Title: Investigation on the role of microstructure and temperature on tribological characteristics of fine-grained ZE41 Mg alloy
Venkataiah M., Anup Kumar T., Venkata Rao K., Anand Kumar S., Dumpala R., Ratna Sunil B.
Source: Tribology - Materials, Surfaces and Interfaces Volume: 16,1P: 68-75(Scopus)
12) Title: Temperature-dependent 2-dimensional porous FG plates free vibration analysis using finite element approach
Ramu I
Source: Incas Bulletin Volume: 14,4P: 119-129(GS)
13) Title: Suitability of Hybrid Aluminium Metal Matrix Composite Material to Replace Cast Iron in Automobile Components
Habibullah M., Manikanta N.V.V., Varun A., Praveen M.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 339-349(Scopus)
14) Title: Computational Analysis of a Convergent Divergent Nozzle
Pothala S., Raju M.V.J., Bangarraju B., Lakshmi Narayana V.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 503-509(Scopus)
15) Title: Heat Transfer Characteristics of Spherical Finned Rectangular Microchannel
Sudheer S.V.S., Kumar C.H.N., Mahesh G., Prakesh C.H.B.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 473-481(Scopus)
16) Title: Design and Evaluation of Manual Weeder for Dryland Crops
Krishna P.D.V.N., Chakravarthi V.M., Vinod M., Pothala S.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 491-501(Scopus)
17) Title: Investigation of Diesel Engine’s Performance Using Nano Additives in Biodiesel Blends (B20, B30 and B40)
Bangarraju B., Srinivas P., Narasinga Rao G., Bhanuprakash C.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 441-451(Scopus)
18) Title: Design and Fabrication of Automatic Vehicle for Railway Track Monitoring by Using ESP8266 Module
Daloji L., Ramu I., Rao N., Manikanta P.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 483-490(Scopus)
19) Title: Optimization of Dynamic Capacity of Deep Groove Ball Bearing by Using Genetic Algorithm
Bhanuteja K., Vinod M., Krishna D.V.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 329-338(Scopus)
20) Title: Influence of Drop Weight Low-Velocity Impact on Thin Panels Study by Numerical Simulation and Experimental Approach
Ramu I., Seshu K.V.G.R., Srinivas P., SenthilKumar P.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 281-288(Scopus)
2023-'24
1) Title: Experimental Study on Transition of Single Phase to Two Phase in a Natural Circulation Loop Filled with Al2O3 Nanofluid
Sudi V.S.S., Kupireddy K.K., Balasubramanian K., Nagireddy P.D.
Source: Iranian Journal of Science and Technology - Transactions of Mechanical Engineering Volume: 47,4P: 1437-1447(Scopus)
2) Title: Comparison of the Anode Side Catalyst Supports with and without Incorporation of Liquid Electrolyte Layer on the Performance of a Passive Direct Methanol Fuel Cell
Boni M., Velisala V., Kattela S., Sudheer S.V.S., Pullagura G., Barik D.
Source: International Journal of Energy Research Volume: 2023,P: 1224-1229(Scopus)
3) Title: Optimisation of cold extrusion process parameters on AA 2024 alloy using grey relational analysis
Francy K.A., Rao C.S.
Source: International Journal of Materials Engineering Innovation Volume: 14,2P: 178-198(Scopus)
4) Title: Study on Free Vibration Analysis of a Rotating FibreGraphene-Reinforced Hybrid Polymer CompositesPre- Twist Shell
I. Ramu, Battina N. Malleswararao, J. Chandra Sekhar, M. Venu1, P. Senthil Kumar
Source: INCAS BULLETIN Volume: 15,2P: 149-159(GS)
5) Title: Studies on Influence of Surface Modifications on the Mechanical Properties of Basalt Fiber Reinforced Epoxy Composites
Benda M.A., Nandivelugu N.K., Mangam V., Gamini S.
Source: AIP Conference Proceedings Volume: 3006,1P: 1-8(Scopus)
6) Title: Comparison on single point incremental forming and micro incremental forming - A review
Nagappa S., Niranjan T., Kotha M.N.V.S.A.S., Chinamilli N.V.S.S., Srinivas P., Yoganjaneyulu G.
Source: AIP Conference Proceedings Volume: 2810,P: 1-9(Scopus)
7) Title: Analytical Estimation of Power for a Fabricated Power Generating Train Using Rack and Pinion Mechanism
Daloji L., Venkatesh M., Rao N., Venu M.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 345-352(Scopus) (WoS)
8) Title: Numerical and Experimental Investigation of the Finite Life of Low-Carbon Steel Cylindrical Notched Specimens
Durga Hemanth Kumar K., Daloji L., Chandra Sekhar J., Ramu I.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 499-511(Scopus)
9) Title: Experimental Investigation to Enhance the Performance of Freezer with Phase Change Material
Vinod M., Mahesh Chakravarthi V., Venu M., Krishna D.V.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 977-984(Scopus) (WoS)
Sudi V.S.S., Kupireddy K.K., Balasubramanian K., Nagireddy P.D.
Source: Iranian Journal of Science and Technology - Transactions of Mechanical Engineering Volume: 47,4P: 1437-1447(Scopus)
2) Title: Comparison of the Anode Side Catalyst Supports with and without Incorporation of Liquid Electrolyte Layer on the Performance of a Passive Direct Methanol Fuel Cell
Boni M., Velisala V., Kattela S., Sudheer S.V.S., Pullagura G., Barik D.
Source: International Journal of Energy Research Volume: 2023,P: 1224-1229(Scopus)
3) Title: Optimisation of cold extrusion process parameters on AA 2024 alloy using grey relational analysis
Francy K.A., Rao C.S.
Source: International Journal of Materials Engineering Innovation Volume: 14,2P: 178-198(Scopus)
4) Title: Study on Free Vibration Analysis of a Rotating FibreGraphene-Reinforced Hybrid Polymer CompositesPre- Twist Shell
I. Ramu, Battina N. Malleswararao, J. Chandra Sekhar, M. Venu1, P. Senthil Kumar
Source: INCAS BULLETIN Volume: 15,2P: 149-159(GS)
5) Title: Studies on Influence of Surface Modifications on the Mechanical Properties of Basalt Fiber Reinforced Epoxy Composites
Benda M.A., Nandivelugu N.K., Mangam V., Gamini S.
Source: AIP Conference Proceedings Volume: 3006,1P: 1-8(Scopus)
6) Title: Comparison on single point incremental forming and micro incremental forming - A review
Nagappa S., Niranjan T., Kotha M.N.V.S.A.S., Chinamilli N.V.S.S., Srinivas P., Yoganjaneyulu G.
Source: AIP Conference Proceedings Volume: 2810,P: 1-9(Scopus)
7) Title: Analytical Estimation of Power for a Fabricated Power Generating Train Using Rack and Pinion Mechanism
Daloji L., Venkatesh M., Rao N., Venu M.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 345-352(Scopus) (WoS)
8) Title: Numerical and Experimental Investigation of the Finite Life of Low-Carbon Steel Cylindrical Notched Specimens
Durga Hemanth Kumar K., Daloji L., Chandra Sekhar J., Ramu I.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 499-511(Scopus)
9) Title: Experimental Investigation to Enhance the Performance of Freezer with Phase Change Material
Vinod M., Mahesh Chakravarthi V., Venu M., Krishna D.V.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 977-984(Scopus) (WoS)
2024-'25
1) Title: Multi Response Optimization of Cold Extrusion Parameters on AA 2024 Alloy Using TOPSIS
Francy K.A.; Rao C.S.
Source: Journal of The Institution of Engineers (India): Series D Volume: ,P: 1-15(Scopus)
2) Title: Effect of Vortex Generator Placement and Nanofluids on Channel Flow Heat Transfer
Kummitha O.R.; Dwarshala S.K.R.; Chary K.; Mangam V.; Chirala H.; Battina N.M.
Source: Heat Transfer Engineering Volume: 45,17-18P: 1523-1537(Scopus) (WoS)
3) Title: Enhancing Strength and Surface Quality of 3D-Printed Metal-Infused Filaments in Fused Deposition Modelling †
Ganga R.S.K.V.; Inala R.; Jowdula C.S.; Matti P.; Malleswararao B.N.
Source: Engineering Proceedings Volume: 66,1P: 1-4(Scopus)
4) Title: EMPATHIZING PARKINSONS DISEASE USING SUPERVISED LEARNING METHODS
Madugula S.; Gunda A.; Srinivas Y.; Kotaiah N.C.; Raju G.N.; Badipati S.G.; Bhavitha B.
Source: Journal of Theoretical and Applied Information Technology Volume: 102,21P: 7615-7623(Scopus)
5) Title: A framework for prediction of extrusion responses using machine learning algorithm
Manohar G.; Francy K.A.; Rao C.S.
Source: International Journal on Interactive Design and Manufacturing Volume: ,P: 1-14(Scopus)
6) Title: Numerical Investigation of Phase-Changing Material Filled Shell and Tube Heat Exchanger with Fins
Nagireddy P.D.; Shankar Vikas M.; Sudi V.S.S.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 651-660(Scopus)
7) Title: Development of bagasse/PLA composites, its mechanical & chemical properties: A review
Sai D.S.; Singh S.K.; Chattaraj A.; Chandhu K.V.; Durga D.S.L.; Samudram L.P.; Kumar D.H.; Singh J.I.P.
Source: AIP Conference Proceedings Volume: 2962,1P: 1-6(Scopus)
8) Title: Static Stress Analysis of Dental Crown with Different Materials Using Finite Element Approach
Ramu I.; Chandra Sekhar J.; Manikanta N.V.V.; Venu M.; Malleswararao Battina N.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 431-439(Scopus)
9) Title: Evaluation of Mechanical Properties of a Crab Shell Hybrid Composite
Narasinga Rao G.; Daloji L.; Revanth D.; Ramu I.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 489-499(Scopus)
10) Title: Message from Patron, Principal
Venu M.
Source: IOP Conference Series: Earth and Environmental Science Volume: 1375,1P: 1-27(Scopus)
Francy K.A.; Rao C.S.
Source: Journal of The Institution of Engineers (India): Series D Volume: ,P: 1-15(Scopus)
2) Title: Effect of Vortex Generator Placement and Nanofluids on Channel Flow Heat Transfer
Kummitha O.R.; Dwarshala S.K.R.; Chary K.; Mangam V.; Chirala H.; Battina N.M.
Source: Heat Transfer Engineering Volume: 45,17-18P: 1523-1537(Scopus) (WoS)
3) Title: Enhancing Strength and Surface Quality of 3D-Printed Metal-Infused Filaments in Fused Deposition Modelling †
Ganga R.S.K.V.; Inala R.; Jowdula C.S.; Matti P.; Malleswararao B.N.
Source: Engineering Proceedings Volume: 66,1P: 1-4(Scopus)
4) Title: EMPATHIZING PARKINSONS DISEASE USING SUPERVISED LEARNING METHODS
Madugula S.; Gunda A.; Srinivas Y.; Kotaiah N.C.; Raju G.N.; Badipati S.G.; Bhavitha B.
Source: Journal of Theoretical and Applied Information Technology Volume: 102,21P: 7615-7623(Scopus)
5) Title: A framework for prediction of extrusion responses using machine learning algorithm
Manohar G.; Francy K.A.; Rao C.S.
Source: International Journal on Interactive Design and Manufacturing Volume: ,P: 1-14(Scopus)
6) Title: Numerical Investigation of Phase-Changing Material Filled Shell and Tube Heat Exchanger with Fins
Nagireddy P.D.; Shankar Vikas M.; Sudi V.S.S.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 651-660(Scopus)
7) Title: Development of bagasse/PLA composites, its mechanical & chemical properties: A review
Sai D.S.; Singh S.K.; Chattaraj A.; Chandhu K.V.; Durga D.S.L.; Samudram L.P.; Kumar D.H.; Singh J.I.P.
Source: AIP Conference Proceedings Volume: 2962,1P: 1-6(Scopus)
8) Title: Static Stress Analysis of Dental Crown with Different Materials Using Finite Element Approach
Ramu I.; Chandra Sekhar J.; Manikanta N.V.V.; Venu M.; Malleswararao Battina N.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 431-439(Scopus)
9) Title: Evaluation of Mechanical Properties of a Crab Shell Hybrid Composite
Narasinga Rao G.; Daloji L.; Revanth D.; Ramu I.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 489-499(Scopus)
10) Title: Message from Patron, Principal
Venu M.
Source: IOP Conference Series: Earth and Environmental Science Volume: 1375,1P: 1-27(Scopus)
2025-'26
1) Title: Performance Enhancement of Pump Parameters Through Innovative Spring Design of Mechanical Seal for a Heat Exchanger
I. Ramu; G. Suresh Bau; Manikanta N.V.V.; Venu M.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 195-203(Scopus)
2) Title: Effect of Shot Peening-Induced Microstructure and Precipitate Evolutions on the Surface Residual Stresses, Hardness, and Wear Behavior of Al 6061 Alloy
M. Praveen; Prasad C.R.; Chembuly V.V.M.J.S.; Sai A.N.; Chekuri R.B.R.; Penmetsa R.V.; Gudaru K.R.
Source: Journal of The Institution of Engineers (India): Series D Volume: ,P: 1-11(Scopus)
3) Title: Role of Laser Shock Peening in Refining Microstructure and Mitigating Corrosion in AA5083 Alloy
Prasad C.R.; Sai A.N.; Mathi P.; Chembuly V.V.M.J.S.; Chekuri R.B.R.; Penmetsa R.V.; Gudaru K.R.
Source: Journal of The Institution of Engineers (India): Series D Volume: ,P: 1-10(Scopus)
4) Title: Implementing 3D Printing Material Selection using Multi-criteria Decision-Making Approach
Seshu Y.; Tejaswa M.; Meghana V.; K. Anupama Francy; S.V. Sai Sudheer
Source: Advances in Science, Technology and Innovation Volume: ,P: 459-466(Scopus)
5) Title: Parametric modeling in cold extrusion of Al 2014 alloy using Taguchi method–based GRA
K, Anupama Francy.; S, Venkata Sai Sudheer.; N, Naga Krishna.; Ch, Naveen Kumar.; M, Venu.
Source: Journal of Engineering and Applied Science Volume: 72,1P: 127-141(Scopus)
6) Title: Effect of laser shock peening on grain structure, surface hardness, residual stresses, and wear behavior of Al5083 alloy
Mathi Praveen.; Ch. V.V.M.J. Satish.; A.Naga Sai.; Ch. Ram Prasad ; Chekuri R.B.R.; Penmetsa R.V.; Gudaru K.R.
Source: Engineering Research Express Volume: 7,2P: 1-8(Scopus)
7) Title: Performance analysis of proton exchange membrane fuel cells with various serpentine flow channel designs
Boni M.; Velisala V.; S. V. Sai Sudheer.; Adarsh Kumar M.
Source: Environmental Progress and Sustainable Energy Volume: ,P: 1-5(Scopus)
8) Title: Open Discussion Forums and Effective Group Division for Improved Student Engagement in Teaching Learning Process
Manojkumar R.; Krishnan S.
Source: Journal of Engineering Education Transformations Volume: 38,Special Issue 2P: 488-494(Scopus)
9) Title: Analysis of vibration characteristics and buckling behaviour of rotating fiber–graphene-reinforced composite pre-twisted shells
I. Ramu.; J. Chandra Sekhar.; M. Venu; Battina N.M.; N.V.V. Manikanta; Gujalla R.
Source: Transactions of the Canadian Society for Mechanical Engineering Volume: 49,2P: 301-310(Scopus)
I. Ramu; G. Suresh Bau; Manikanta N.V.V.; Venu M.
Source: Lecture Notes in Mechanical Engineering Volume: ,P: 195-203(Scopus)
2) Title: Effect of Shot Peening-Induced Microstructure and Precipitate Evolutions on the Surface Residual Stresses, Hardness, and Wear Behavior of Al 6061 Alloy
M. Praveen; Prasad C.R.; Chembuly V.V.M.J.S.; Sai A.N.; Chekuri R.B.R.; Penmetsa R.V.; Gudaru K.R.
Source: Journal of The Institution of Engineers (India): Series D Volume: ,P: 1-11(Scopus)
3) Title: Role of Laser Shock Peening in Refining Microstructure and Mitigating Corrosion in AA5083 Alloy
Prasad C.R.; Sai A.N.; Mathi P.; Chembuly V.V.M.J.S.; Chekuri R.B.R.; Penmetsa R.V.; Gudaru K.R.
Source: Journal of The Institution of Engineers (India): Series D Volume: ,P: 1-10(Scopus)
4) Title: Implementing 3D Printing Material Selection using Multi-criteria Decision-Making Approach
Seshu Y.; Tejaswa M.; Meghana V.; K. Anupama Francy; S.V. Sai Sudheer
Source: Advances in Science, Technology and Innovation Volume: ,P: 459-466(Scopus)
5) Title: Parametric modeling in cold extrusion of Al 2014 alloy using Taguchi method–based GRA
K, Anupama Francy.; S, Venkata Sai Sudheer.; N, Naga Krishna.; Ch, Naveen Kumar.; M, Venu.
Source: Journal of Engineering and Applied Science Volume: 72,1P: 127-141(Scopus)
6) Title: Effect of laser shock peening on grain structure, surface hardness, residual stresses, and wear behavior of Al5083 alloy
Mathi Praveen.; Ch. V.V.M.J. Satish.; A.Naga Sai.; Ch. Ram Prasad ; Chekuri R.B.R.; Penmetsa R.V.; Gudaru K.R.
Source: Engineering Research Express Volume: 7,2P: 1-8(Scopus)
7) Title: Performance analysis of proton exchange membrane fuel cells with various serpentine flow channel designs
Boni M.; Velisala V.; S. V. Sai Sudheer.; Adarsh Kumar M.
Source: Environmental Progress and Sustainable Energy Volume: ,P: 1-5(Scopus)
8) Title: Open Discussion Forums and Effective Group Division for Improved Student Engagement in Teaching Learning Process
Manojkumar R.; Krishnan S.
Source: Journal of Engineering Education Transformations Volume: 38,Special Issue 2P: 488-494(Scopus)
9) Title: Analysis of vibration characteristics and buckling behaviour of rotating fiber–graphene-reinforced composite pre-twisted shells
I. Ramu.; J. Chandra Sekhar.; M. Venu; Battina N.M.; N.V.V. Manikanta; Gujalla R.
Source: Transactions of the Canadian Society for Mechanical Engineering Volume: 49,2P: 301-310(Scopus)
A few bigwigs of our students hiring companies
